VERY HIGH PRESSURE PTFE HOSE

Very high-pressure hose made with PTFE antistatic resin and reinforced by a 304L stainless steel braid, high tenacity.

Product highlights

  • Perfect solution for the transfer of chemical products, solvents, steam both at high temperature and pressure.
  • Transfer of food products, in accrodance with the regulation FDA 21 CFR 177 1550
  • Non-adherent PTFE allowing a good flow of the conveyed liquids, with a minimum pressure loss.
  • Can be used in explosive areas without restriction. INERIS validation n°87830-1/07.

Technical features

  • Available from ND 6 to 25mm (0.23 to 1 inches)
  • Working pressure 350 bar (5076 PSI)
  • Working temperature range from -70 to +260°C (-56 to +126°F)

Assembling possibilities
The 316L stainless steel swaged fittings are monoblocs (without welding) in accordance with the NRS® design (Non Retention System). All kinds of fittings available on request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).

 

Standards and certifications

Atex validated by INERIS in accordance with the certification n°87830-1/07 (Assembly by GECITECH).

 

Downloads :